I wrote a book. And this is it. Simply Stitching - Your No-Fuss Guide to Colourful Embroidery. It is a combination of my two ebooks, Small Stitches and Stitching Borders and Beyond. The Small Stitches part has been re-stitched and re-photographed. Plus there's a section with all new stuff about tools and techniques. And a couple of extra patterns for good measure.
And it's not an ebook! It's a proper printed book with a shiny cover and everything! It is only available as a print on demand book through the Blurb site. (Although it will be available as an ebook eventually, but that's a different story).
Man, a lot of hours have been poured into making this book a reality. And it's all done by me. I'm not sure I would have done it if I had realised just how long it would take. I mean, who writes, stitches, photographs and designs a book all by themselves?! Crazy people, that's who!
Here's a page from the book. If you fancy seeing more pages, there is a preview widget over in the sidebar. The preview is quite small but you can view it in fullscreen mode too. Or you can click over to the book's Blurb page to have a look.
The book is £16.49 + shipping in the Blurb store, but I can buy it in bulk and save about 10% off the 'factory' price, making the book about £3-4 cheaper. But I need to buy more than 10 to get the bulk discount. If you are interested in buying the book from me (I'll even sign it if you like..) please get in touch.
Monday, August 16, 2010
Tuesday, August 10, 2010
Let's talk satin stitch
Let's talk about the satin stitch. I really like this stitch; I am not completely sure why because you have to be fairly patient to stitch it and it uses quite a lot of thread. Which kinda bothers me. So sometimes I use the Lazy Satin stitch instead.
But let's get on with the proper satin stich. Oh and this may get a wee bit controversial...
You can draw your shape so you have a guide to stitch from. Or you can use a single strand of 6-strand cotton to 'sketch' where to do your stitching, but do cover those stitches or remove them afterwards.
In all the satin stitching I have done, I have found that starting at the widest part of the shape makes for the best result. For example, a circle, start in the middle and then work the sides, one at a time.
When you are working a curvy shape like a circle, you will be stitching in steps. Each stitch is separated from the next by one thread in the fabric you are working on.
Think of your fabric like a grid. In the example of the circle, you work a few stitches on the same 'line' in the middle part. Then, as you move towards the sides you move down one AND one to the right (or left) and so on. Sometimes a circle looks more even if you do [middle part] then 1 down and 1 to the right, then another stitch on the same 'line' and then start doing the 1 down, 1 right.
Usually you don't need to go all the way to each side with the stitches. The eye will still see it as a circle! Take a look at the drawing above, the large circle looks quite rough, but seen from a distance you don't notice.
In this example maybe you can see how the stitches are done? You may have to click on the image to see it larger. The finer your fabric the easier it is to get a smooth result on a curved shape.
Satin stitch in itself is raised above the surface, but if you fancy giving it a bit more oomph(!), you can fill in the shape with straight stitches first, then do your satin stitching on top.
Now. This is where it may become a bit controversial. These are not satin stitches. Or not proper ones, anyway. And don't believe anyone who tells you differently.
I know satin stitches can be a bit tricky to work and maybe you think it looks horribly uneven at the edges. And you may be tempted to stitch around the edges to cover up the roughness. As I have in this image. But I urge you to fight this temptation with everything you've got!
It is not very elegant.. If you are worried about your shape looking rough, remember this: while you are working on your satin stitching, you are probably really close to it (certainly if you're near-sighted like me!) and every little 'mistake' will look horribly large.
But from a distance you will not be able to see all that- you will only see your satin stitched shape. So don't succumb to the cover-up stitches, ok!
However, I do sometimes do stitches like those three. But I don't think of them as satin stitch. They look kinda like set jewels, so I think of them as 'jewel stitch'.
But let's get on with the proper satin stich. Oh and this may get a wee bit controversial...
You can draw your shape so you have a guide to stitch from. Or you can use a single strand of 6-strand cotton to 'sketch' where to do your stitching, but do cover those stitches or remove them afterwards.
In all the satin stitching I have done, I have found that starting at the widest part of the shape makes for the best result. For example, a circle, start in the middle and then work the sides, one at a time.
When you are working a curvy shape like a circle, you will be stitching in steps. Each stitch is separated from the next by one thread in the fabric you are working on.
Think of your fabric like a grid. In the example of the circle, you work a few stitches on the same 'line' in the middle part. Then, as you move towards the sides you move down one AND one to the right (or left) and so on. Sometimes a circle looks more even if you do [middle part] then 1 down and 1 to the right, then another stitch on the same 'line' and then start doing the 1 down, 1 right.
Usually you don't need to go all the way to each side with the stitches. The eye will still see it as a circle! Take a look at the drawing above, the large circle looks quite rough, but seen from a distance you don't notice.
In this example maybe you can see how the stitches are done? You may have to click on the image to see it larger. The finer your fabric the easier it is to get a smooth result on a curved shape.
Satin stitch in itself is raised above the surface, but if you fancy giving it a bit more oomph(!), you can fill in the shape with straight stitches first, then do your satin stitching on top.
Now. This is where it may become a bit controversial. These are not satin stitches. Or not proper ones, anyway. And don't believe anyone who tells you differently.
I know satin stitches can be a bit tricky to work and maybe you think it looks horribly uneven at the edges. And you may be tempted to stitch around the edges to cover up the roughness. As I have in this image. But I urge you to fight this temptation with everything you've got!
It is not very elegant.. If you are worried about your shape looking rough, remember this: while you are working on your satin stitching, you are probably really close to it (certainly if you're near-sighted like me!) and every little 'mistake' will look horribly large.
But from a distance you will not be able to see all that- you will only see your satin stitched shape. So don't succumb to the cover-up stitches, ok!
However, I do sometimes do stitches like those three. But I don't think of them as satin stitch. They look kinda like set jewels, so I think of them as 'jewel stitch'.
Subscribe to:
Posts (Atom)

